Explosion-proof small wireless base station
The RF output of the explosion-proof wireless base station is electroplated and isolated to make the product as an intrinsically safe type of explosion-proof. It is suitable for wireless APs of various brands, and can choose explosion-proof wireless equipment used with other certified antennas.
Explosion-proof mark | |
| Explosion Proof Mark | EX |
| Gas Explosion-proof Type | d ia |
| Dust Explosion-proof Type | tD(ta,tb,tc) tb |
| Gas Hazardous Location Group | IIC |
| Dust Hazardous Location Group | IIIC |
| Special Gas Marking | H2 |
| ambient temperature Classes for Gas | T6 |
| ambient temperature Classes for Dust | T85℃ |
| EPL: Equipment Protection Level-Gas | Ga [ia] Gb |
| EPL: Equipment Protection Level-Dust | Da [ia] |
| Special Certification | X |
| IP Enclosure Ratings | IP66 |
Product specifications | |
| Body Size | Ø(mm)diameter 56 Width(W) 89.7 High(H) 86 |
| Output Power(W) | 25W/ with heater 125W |
Recommend
Ex ib mobile
Ex ia mobile: Provides mobility for users in hazardous areas with the new Ex-Handy in Zone 1/Division 1
Ex ia smart mobile,Ex ib smart mobile
| Software | |
| Ambient conditions | |
| Ambient temperature | -20 ... 60 °C (-4 ... 140 °F) |
| Mechanical specifications | |
| Degree of protection | IP64 |
| Mass | approx. 380 g |
| Dimensions | H x W x D 163 mm x 82 mm x 22 mm |
| ATEX marking | 1 II 2G Ex ib op is IIC T4 Gb IP64 1 II 2D Ex ib op is IIIC T120°C Db Ta = -20 °C to +60 °C |
| IECEx marking | Ex ib op is IIC T4 Gb IP64 Ex ib op is IIIC T120°C Db Ta = -20 °C to +60 °C |
Explosion-proof antenna
Explosion-proof antenna coupler permits the installation of non-Ex certified antennas in hazardous areas.
this coupler is designed to be uesd directly with listed explosion proof housings or conduit fittings.
an integrated blocking circuit prevents hazardous energy reaching the antenna if a radio, modem or access point failure occures. it also allows for antenna removal in hazardous areas.
the coupler's robust design allows for connection to practically any radio and antenna.it is a highly flexible and cost effective solution to hazardous area radio system deployment.
the coupler can also be used as a cable bulkhead.
fitting is approved for hazardous locations and can be installed with a simple wrench.
Explosion-proof wireless base station
The RF output of the explosion-proof wireless base station is electroplated and isolated to make the product an intrinsically safe type of explosion-proof. It is suitable for wireless wireless APs of various brands, and can choose explosion-proof wireless equipment used with other certified antennas.
Antenna for Explosion-proof Wireless System
It is a rugged omni directional antenna with dual band functionality.